Bimetallic White iron Grizzly Bars
Superior wear resistance For Crushing Circuit
Grizzly Caps improve performance in Downstream, Secondary and Tertiary Crushing
Dimensions:
| TYPE |
ITEM NO. |
SIZE(MM) |
Dimension |
N.W(kg) |
| A |
B |
C |
| 1 |
GB1-105 |
150x137.5 |
305 |
150 |
137.5 |
13.6 |
| GB1-137.5 |
137.5x125 |
305 |
137.5 |
125 |
12.5 |
| GB1-125 |
125x112.5 |
305 |
125 |
112.5 |
11.2 |
| GB1-112.5 |
112.5x100 |
305 |
112.5 |
100 |
10 |
| GB100 |
100x87.5 |
305 |
100 |
87.5 |
8.8 |
| GB1-87.5 |
87.5x75 |
305 |
87.5 |
75 |
7.5 |
| GB1-75 |
75x62.5 |
305 |
75 |
62.5 |
6.3 |
| GB1-62.5 |
62.5x50 |
305 |
62.5 |
50 |
5.1 |
| 2 |
GB2-150 |
150x141 |
305 |
150 |
141 |
13.8 |
| GB2-141 |
141x131 |
305 |
141 |
131 |
12.9 |
| GB2-131 |
131x122 |
305 |
131 |
122 |
11.9 |
| GB2-122 |
122x113 |
305 |
122 |
113 |
11.1 |
| GB2-113 |
113x103 |
305 |
113 |
103 |
10.1 |
| GB2-103 |
103x94 |
305 |
103 |
94 |
9.2 |
| GB2-94 |
94x84 |
305 |
94 |
84 |
8.3 |
| GB2-84 |
84x75 |
305 |
84 |
75 |
7.4 |
A. Chemical
| C |
Cr |
Mn |
Mo |
Cu |
P |
Si |
S |
B.V.Nb |
| 2.5-3.5 |
15-18 |
0.5-1.0 |
0.5-2.5 |
0.5-1.0 |
0.02max |
0.5-1.0 |
0.02max |
0.1-0.5 |
B. Mechanical Property:
1) Tensile Strength 630Mpa Min.
2) Shearing Strength 250Mpa Min.
3) Hardness 63 HRC
C. Micro-structure
Carbide + Martensite+ Retained Austenite
D. Application
Wear Pads Lip Protectors Screen Plates Bucket Liners
Floor Liners Loaders Wear Aprons Knife Inserts
Crusher Bars Run Out Rolls Dump Hoppers Crusher Hoppers
Vibratory Feeders Rock Box Edges Surge Bin Liners Rock Box Liners
Skip Liners Trough Liners Draglines Concentration Bins
Transition Pieces Coal Transfer Chutes Buckets Apron Feeder Liners
Loading Pocket Liners Splitter/Divider Plates Shovels Hammer Mill Inserts
Rolling Mill Guides Hopper Edges Arm & Hub Liners Bolt Protectors
Truck Bed Liners Impact Wall Liners Distribution Plates Bucket Wheel
Conveyor Transfer Points Protection Jaw Crushers Chute Linings
Ore Chutes Crusher Chutes Tripper Chutes Flop Gates
The most common types are:
•Chocky bars •Standard wear bars
•Wafer strips •Wear buttons& donuts
•Shredder hammer tips •Wear plates
•Knife edges •Skid bars
•Shaped wear bars •Other sizes and shapes
•Micro-ledges •Rockbox liners
Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Wafer strips, WS25, WS40, WS50, WS65;
10) Elbow wear blocks
11) Other sizes and shapes
12) Multi-function gradient cutter tooth
13) Rockbox liners
14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Audited Supplier 
){kind=link}