Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.
HST Bimetallic Wear Plates provides superior resistance to abrasion & impact. Suited for a wide range of Fixed & Mobile applications: Chute's, Hoppers, Apron Feeders, Vibratory Feeders, Transfer points, Ore Passes, Conveyor Skirting, HaulTruck Beds, Target & Deflector plates and Buckets etc.
Typical Advantage/ Properties:
1. Advanced composite technology, good overall performance. It is the third generation since white iron casting and Ni-hard white iron casting. Its hardness could achieve to 63HRC/725BHN, the elements of Cr,Mo,Ni,Cu, etc in the alloy created a better integrated performance(hardness, hardenability, temper resistance). The micro-structure onsists of 85% above Martensite + retained Austenite + Carbide(mainly M7C3 , HV1400-1800).
2. Good corrosion resistance and high temperature resistance(600ºC maximum).
3. Hardness: average 63HRC/700BHN or even a little higher.
4. Well-feasibility: various shapes(including tubular) and dimensions available. Thickness ranges from 12(6/6) to 180mm(150/30). The oversized ones can be spliced.
5. High cost performance: 3 times higher usage life compared with overlay/hardfacing wear plates, at least 10 times longer than A.R type steels 360/400BHN. The thicker ones such as ≥20mm, usage life is much more longer. There is no gradient change on wear resistant performance from plate surface to the brazing joint.
6. Wear plate surface is smooth and flat, media is not easy to stick on.
7. Easy to install and use.
- Welding into place, no pre or post heating required, plug or perimeter weld.
- Arc Studs can easily be attached to the back of the liners to specified requirements.
- Custom counter bore or counter sunk bolt holes can be added.
Some of our products and services:
--Wear plates, wear liners
--Chocky bars and wear buttons
--Wear blocks, wear bars
--Custom made wear liners
--Bucket repair and protection
--Full Fabrication services
--Sugar mill hammer tips
--Drilling, milling or machining
--Casting/Investment casting
--cERAMIC WEAR LINERS
--Manganese wear parts for Crusher
Hyster wear system is more than just a product. It is a combination of products, services and metallurgical expertise to provide superior wear protection for mining equipment and other industrial applications. A key part of this package is the Bimetallic Wear Products, a comprehensive offering of buttons, blocks, bars, runners, tiles and overlay plate to match any application.
Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.
Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Wafer strips, WS25, WS40, WS50, WS65;
10) Elbow wear blocks
11) Other sizes and shapes
12) Multi-function gradient cutter tooth
13) Rockbox liners
14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Please contact us if you have any interest. thank you!
RFQ:
Q: Are you trading company or manufacturer ?
A: We are ISO9001:2008 Certificated factory.
Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. or it is 15 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 30% in advance.,balance against copy of B/L, payable via T/T.
If you have another question, pls feel free to contact us as below:
Audited Supplier 
){kind=link}