| Casting Method: | Sand Casting |
|---|---|
| Casting Form Material: | Sand |
| Casting Metal: | Cast Steel |
| Casting Form Usage Count: | Disposable |
| Surface Treatment: | Polishing |
| Surface Roughness: | Ra0.8 |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 700BHN / 63HRC Bimetallic wear plates
--Material: ASTM A532 CLASS II TYPE B Chrome white iron vacuum brazed onto mild steel base.
C 2.5-3.5 ; Cr 15-18;
--The smallest thickness for wear material we can make is 6mm.
Advantages:
1. Hardness: 63HRC/700BHN. The usage life is at least 2 times higher compared with overlay/hardfacing wear plates, at least 7 times longer than A.R type steels 360/400BHN. The thicker ones such as 20mm above wear plates, usage life is much more longer. The wear resistance performance is the same from wear surface to the welding face.
2. Wear plate surface is smooth and flat, media is not easy to stick on.
3. Can be make into different shapes and sizes.
4. Better cost-efficient.
5. Operating temperature: 600ºC
Applications---Typical applications include the following for the Surge, Mining, Steel, Re-cycling, OEM, Aggregate and other Heavy Industries (to name only a few of the countless applications):
Chute Linings Ore Chutes Crusher Chutes Coal Transfer Chutes
Tripper Chutes Flop Gates Surge Bin Liners Bucket Liners
Rock Box Liners Skip Liners Trough Liners Apron Feeder Liners
Draglines Shovels Screen Plates Loaders
Wear Aprons Concentration Bins Reclaimer Buckets
Loading Pocket Liners Transition Pieces Conveyor Transfer Points
Bolt Protectors Grizzly Bars Rock Box Edges
Hopper Edges Lip Protectors Adaptor Protectors
Deflector Plates Splitter/Divider Plates Wear Pads
Fan Blades Jaw Crushers Hammer Mill Inserts
Knife Inserts Crusher Bars Rolling Mill Guides
Run Out Rolls Dump Hoppers Crusher Hoppers
Floor Liners Arm & Hub Liners Truck Bed Liners
Bucket Liners Impact Wall Liners Distribution Plates
Elastomer Bonded Liners (Noise Reduction) Vibratory Feeders
Hopper (Receiving & Discharge) Liners Bucket Wheel Protection
NiHard is a well-established white iron product alloyed with nickel and chromium to give significant abrasion and impact resistant properties. The structure of NiHard is composed of iron and chromium carbides, fixed in a matrix rendered martensitic by the nickel content. This structure allows NiHard to be utilised in abrasive and high impact conditions found throughout the construction, mining, manufacturing and mineral processing industries.
Hyster NiHard products include billets and liner plates that can be made to the customers' specification or supplied from our range of stock sizes. Hyster's NiHard products can be custom designed to meet any situation regardless of any size and shape
concerns. Hyster can also supply cut and shaped liners to be strategically placed on fixed plant equipment so that a unique wear package can be created, maximising wear life. This makes NiHard the perfect material for chutes, drop boxes, bin and hopper liners.
Hyster primarily supplies cast billet and liner plates produced to the NiHard 4 specifications. However, Hyster can produce billets and liner plates from the followingalloys on special request:
NiHard 1 & 2
27 Chrome Alloy
15/3 White Iron
20/1 White Iron
| MATERIAL | Size | Hardness |
| NI-HARD 4 LINER PLATE | 450X300X32 | >600BHN |
| NI-HARD 4 LINER PLATE | 450X200X32 | >600BHN |
| NI-HARD 4 LINER PLATE | 300X150X32 | >600BHN |
| NI-HARD 4 LINER PLATE | 300X100X32 | >600BHN |
NI-HARD 4
Hyster offer our clients a wide range of other wear products and professional wear solutions. We also welcome custom made one off's and consumables.
Some of our products and services:
--Wear plates, wear liners
--Chocky bars and wear buttons
--Wear blocks, wear bars
--Custom made wear liners
--Bucket repair and protection
--Full Fabrication services
--Sugar mill hammer tips
--Drilling, milling or machining
--Casting/Investment casting
--Fast service and timely delivery
Following are some of our standard laminated wear blocks:
Laminated wear blocks---the most common types are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Wafer strips, WS25, WS40, WS50, WS65;
10) Elbow wear blocks
11) Other sizes and shapes
12) Multi-function gradient cutter tooth
13) Rockbox liners
14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Application:
RFQ
A: We are ISO9001:2015 Certificated factory.
A: Generally it is 5 days if the goods are in stock. or it is 15 days if the goods are not in stock, it is according to quantity.
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
A: 30% in advance.,balance against copy of B/L, payable via T/T.
If you have another question, pls feel free to contact us as below:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}