Direct Manufacturer for Bi-Metallic Shredder Hammer Tips
These are bi-metallic composites having 700 BHN hardness and available in various sizes and shapes, shredder hammer tips can be used in sugar or coal industry to do crushing and shredding performance, it has excellent impact and abrasion resistance properties & enhanced service life.
These shredder hammer tips are used as an alternative to conventional hardfacing in:
--Crusher mills
--Hammer mills
These hammers find application in
I) Sugar Industry
II) Mining & Mineral Processing Industry.
III) Cement & Steel Industry
TYPE 1 HAMMER TIPS: (FLAT TYPE)
Item No. |
Size(mm) |
N.W.(kg) |
| HC1 90-90 |
90x90x45 |
2.9 |
| HC1 90-50 |
90x50x45 |
1.6 |
| HC1 50-50 |
50x50x38 |
0.7 |
| HC1 80-80 |
80x80x45 |
2.4 |
| HC1 100-100 |
100x100x45 |
3.6 |
| HC1 64-64 |
64x64x40 |
1.2 |
| HC1 80-56 |
80x56x45 |
1.6 |
TYPE 2 HAMMER TIPS: (V TYPE)
Item No. |
Size(mm) |
N.W(kg) |
| HC2 90-90 |
90x90x50 |
3.0 |
| HC2 80-56 |
80x56x50 |
1.8 |
TYPE 3 HAMMER TIPS: (U TYPE)
Item No. |
Size(mm) |
N.W.(kg) |
| HC3 90-90 |
90x90x50 |
3.0 |
| HC3 90-50 |
90x50x55 |
1.8 |
| HC3 90-56 |
90x56x55 |
1.9 |
Hyster also manufacture customized sizes and shapes.
The most common types are:
•Chocky bars •Standard wear bars
•Wafer strips •Wear buttons& donuts
•Shredder hammer tips •Wear plates
•Knife edges •Skid bars
•Shaped wear bars •Other sizes and shapes
•Micro-ledges •Rockbox liners
Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Wafer strips, WS25, WS40, WS50, WS65;
10) Elbow wear blocks
11) Other sizes and shapes
12) Multi-function gradient cutter tooth
13) Rockbox liners
14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Audited Supplier 
){kind=link}