China Earliest Factory Supply Vacuum Brazed Bimetallic Wear Liners, White Iron Wear Plates

• Casting Method: Sand Casting
• Casting Form Material: Sand
• Casting Metal: Cast Iron
• Casting Form Usage Count: Disposable
• Surface Treatment: Polishing
• Surface Roughness: Ra1.6
• Coating: None
• Machining Tolerance: +/-0.10mm
• Standard: ASTM
• Certification: ISO 9001:2008
• Wear Material: White Iron, ASTM A532 15/3 Class II Type B
• Hardness: 63HRC / 700bhn
• Base Plate: Mild Steel
• Technology: Vacuum Brazing
• Transport Package: Polywood Crates, Polywood Pallets
• Specification: Bimetallic wear liners
• Trademark: OEM, HYSTER
• Origin: Hunan, China
• HS Code: 84314991
• Production Capacity: 200tons Per Month

Product Description

 vacuum brazed Bimetallic Domite wear liners
China earliest factory since 1995, most competitive price!
White iron Domite wear liners
700BHN Domite liners 15-40mm thick
Bimetallic Domite wear liners, white iron wear plates

Material: ASTM A532 CLASS II TYPE B Chrome white iron vacuum brazed onto mild steel base plate.

The smallest thickness of white iron wear casting we can make is 6mm, no limitation on the maximum thickness.

C	Cr	Mn	Mo	Cu	P	Si	S	B, V, Nb
2.5-3.5	15-18	0.5-1.0	0.5-2.5	0.5-1.0	0.02max	0.5-1.0	0.02max	0.1-0.5

Advantage:

1. Hardness: 63HRC/700BHN. According to the G65 test, the usage life is at least 2 times higher compared with overlay/hardfacing wear plates, at least 7 times longer than A.R type steels 360/400BHN. The thicker ones such as 20mm above wear plates, usage life is much more longer. The wear resistant performance is the same from plate surface to the brazing joint.

2. Wear plate surface is smooth and flat, media is not easy to stick on.

3. Shapes and sizes can be made on request; Bolts, Nuts, Washers, Holes, Threads are available on request.

4. Better cost-efficient. Unit price is about USD5.5---USD6.5 per kilogram, no matter how thick it is.

5. Operating temperature: 550ºC

700BHN Domite liners 15-40mm thick, PRODUCT PHOTOS:




 

NOTE: for big sheet size, wear casting may need to be splice. For example, wear plate 1500x400x25/6mm(25mm wear, 6mm base), the wear casting will be jointed with 4pcs, and mild steel base plate will be joint with 2pcs.
 

Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.

Some of our products and services:
  --Wear plates, wear liners 
  --Chocky bars and wear buttons 
  --Wear blocks, wear bars 
  --Custom made wear liners 
  --Bucket repair and protection 
  --Full Fabrication services 
  --Sugar mill hammer tips 
  --Drilling, milling or machining 
  --Casting/Investment casting 
  --cERAMIC WEAR LINERS
 --Manganese wear parts for Crusher
 


Hyster wear system is more than just a product. It is a combination of products, services and metallurgical expertise to provide superior wear protection for mining equipment and other industrial applications. A key part of this package is the Bimetallic Wear Products, a comprehensive offering of buttons, blocks, bars, runners, tiles and overlay plate to match any application.

Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.

Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
  1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
  2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
  3) Shaped wear bars
  4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
  5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
  6) Bi-metallic wear plates
  7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
  8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
  9) Wafer strips, WS25, WS40, WS50, WS65;
 10) Elbow wear blocks
 11) Other sizes and shapes
 12) Multi-function gradient cutter tooth
 13) Rockbox liners
 14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Please contact us if you have any interest. thank you!

RFQ:
Q: Are you trading company or manufacturer ?
A: We are ISO9001:2008 Certificated factory.

Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. or it is 15 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q: What is your terms of payment ?
A: 30% in advance.,balance against copy of B/L, payable via T/T.

If you have another question, pls feel free to contact us as below: