| Customization: | Available |
|---|---|
| After-sales Service: | Spare Parts for Free |
| Warranty: | 3 Years |
|
Still deciding? Get samples of US$ 7/kg
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
>>Bimetallic chrome white iron brazed wear plates
>>White iron laminated wear plates/Domite wear plates
They combine very high wear resistant qualities of a high white iron plate(ASTM A532 15/3CrMo, 700BHN-63HRC) with a weldable & high impact toughness mild steel plate through vacuum brazing to create a product that is exceptionally resistant to impact and abrasion while retaining.
For different work conditions, we can control the thickness of the layer to reach the overall performance requirements, thus, at the same time, satisfy the abrasion-resisting demand and structural requirement of the wear-resistant parts, then to realize the efficient use of the scarce resources. Most usual thickness ranges from 15mm to 90mm.
| Minimum thickness 12mm | ||
| (6mm white iron + 6mm mild steel base) | ||
| Maximum thickness 160mm | ||
| Maximum dimension without splice L x W: 900x600mm | ||
| Washers, Nuts, Studs, Threads, Holes are available. |
Material: Chrome white iron wear casting vacuum brazed onto mild steel base.
The smallest thickness for wear material we can make is 6mm.
Advantage:
1. Hardness: 63HRC/700BHN. The usage life is at least 2 times higher compared with overlay/hardfacing wear plates, at least 7 times longer than A.R type steels 360/400BHN. The thicker ones such as 20mm above wear, the usage life is much more longer. The wear resistance performance is the same from wear surface to the welding face.
2. Wear surface is very smooth and flat, media is not easy to stick on.
3. It can make with different shapes and sizes.
4. Better cost-efficient. Unit price is about USD5.0~USD7.5 per kilogram.
Suitable for use in chutes, hoppers, bins, liners, impact walls, rock boxes and a variety of other applications.
Very easy to use, no pre or post heating when welding.
In every case, we enable customers to:
Bimetallic White Iron Wear Plate Usage Life is Three Times Higher Than Overlay Wear Plates!! Always the best choice for toughest application such as Iron Ore Mining heavy duty positions!
Applications---Typical applications include the following for the Sugar, Mining, Quarrying, Re-cycling, Aggregate and other Heavy Industries (to name only a few of the countless applications):
| C | Cr | Mn | Mo | Cu | P | Si | S | B,V,Nb |
| 2.5~3.5% | 15~18% | 0.5~1.0% | 0.5~2.5% | 0.5~1.0% | ≤0.02% | 0.5~1.0% | ≤0.02% | 0.1~0.5% |
-Better wear resistance performance
-Durable
-Cost effective
-Excellent quality
Notes: Arc studs available as per sizes or drawings provided.
| Type | Item No. | Size (mm) | Dimension (mm) | N.W. (kg) | ||||
| A | B | C | D | E | ||||
| Standard | WP 200-18 | 200×200×18 | 200 | 200 | 12 | 6 | 18 | 5.7 |
| WP 200-20 | 200×200×20 | 200 | 200 | 14 | 6 | 20 | 6.3 | |
| WP 300A | 300×150×20 | 300 | 150 | 14 | 6 | 20 | 7.0 | |
| WP 250 | 250×250×20 | 250 | 250 | 14 | 6 | 20 | 9.8 | |
| WP 300 | 300×300×18 | 300 | 300 | 12 | 6 | 18 | 12.7 | |
| WP 300B | 300×300×20 | 300 | 300 | 14 | 6 | 20 | 14.1 | |
| WP 305 | 305×150×24 | 305 | 150 | 18 | 6 | 24 | 8.6 | |
| WP 300C | 300×150×25 | 300 | 150 | 19 | 6 | 25 | 8.8 | |
| WP 300D | 300×300×24 | 300 | 300 | 19 | 6 | 25 | 17.7 | |
| WP 445 | 445×445×25 | 445 | 445 | 19 | 6 | 25 | 38.9 | |
| WP 301 | 301×200×28 | 301 | 200 | 18 | 10 | 28 | 13.2 | |
| WP 294A | 294×144×30 | 294 | 144 | 20 | 10 | 30 | 10.2 | |
| WP 294B | 294×294×30 | 294 | 294 | 20 | 10 | 30 | 20.4 | |
| WP 300E | 300×150×30 | 300 | 150 | 20 | 10 | 30 | 10.6 | |
| WP 300F | 300×300×30 | 300 | 300 | 20 | 10 | 30 | 21.2 | |
| WP 372 | 372×372×28 | 372 | 372 | 20 | 8 | 28 | 30.4 | |
| WP 300G | 300×300×50 | 300 | 300 | 40 | 10 | 50 | 35.5 | |
| WP 300H | 300×148×50 | 300 | 148 | 40 | 10 | 50 | 17.4 | |
| WP 206 | 206×203×58 | 206 | 203 | 38 | 20 | 58 | 19.0 | |
| Trapezoidal | WPt 190 | 190×212.5×25 | 190 | 212.5 | 17 | 8 | 25 | 7.9 |
| WPt 241 | 241×290.5×30 | 241 | 290.5 | 22 | 8 | 30 | 19.5 | |
About Us
Hunan Hyster Material Technology Co., LTD. was founded in 1995, we are a professional manufacturer & exporter of composite Bi-metallic wear blocks/wear plates, Bimetallic wear pipes, Chocky bars, Wear buttons(CrMo white iron vacuum brazed onto a mild steel base plate, hardness 63HRC/700BHN), Chromium carbide overlay wear plates, Ni-hard wear Liners/Billets, and other wear castings for Mining, Quarrying, Construction and other heavy industries. We factories are located in New and High-Tech Development Zones of Changsha city, capital of Hunan province, middle of China.
Over 95% products have been sold to nearly 300 customers in more than 40 countries and regions, such as Australia, Canada, Brazil, America, Chile, Argentina, South Africa, Indonesia, Thailand, Mexico, Russia, Holland, as well as many other countries and areas
Quality Guarantee
Quality Report to be submit ahead of delivery: include Metallographic Analysis & Hardness & Chemical Composition Analysis & Welding Quality(UT) & Dimensions & G65 Dry Sand/Rubber Wheel Abrasion Test. 12 month warranty on quality.
The company is certified with ISO9001:2015. We have a dedicated R&D team that can tailor various products with special requirements (such as wear resistance, corrosion resistance, impact resistance, heat resistance, etc.) and provide professional wear resistance solutions. Since its establishment, the company has carried out a lot of experiments on improving the wear resistance and composite bonding strength, various heat treatment technology on different products, and the selection of wear-resistant alloys under different working conditions. The production process and product performance are continuously optimized.
){kind=link}