Laminated chocky bar
Laminated white iron Wear buttons are unique wear resistant materials in that they combine very high wear resistant qualities of a high chrome cast iron (15/3CrMo, 700 BHN - 63 HRC) with a weldable & high impact toughness mild steel through a metallurgical bond to create a product that is exceptionally resistant to impact and abrasion while retaining.
Very easy to use, no pre or post heating when welding. Available in diameters from 60mm up to 150mm. Develop your own layout and pattern to suit your particular wear protection solution.
Dome&Flat Shaped Round: Perfect solution for ground engaging applications as on adaptor teech, shovels, buckets, heavy earth moving equipment etc. Can well use them in conjunction with Chocky Bars, Wear Plates or individually to provide protection or security under the toughest impact and wear abrasion circumstances.
Types:
ITEM |
SIZE(mm) |
Net weight(kg) |
| WB60 |
60x27 |
0.7 |
| WB75 |
75x27 |
0.8 |
| WB90 |
90x27 |
1.4 |
| WB110 |
110x32 |
2.1 |
| WB115 |
115x32 |
2.5 |
| WB150 |
150x41 |
5.7 |
Please contact us if you would like other sizes if needed.
>Material,
ASTM A532 15/3 CrMo white iron casting , chemical composition ( percentage )
C |
Cr |
Mo |
Si |
Mn |
Ni |
Cu |
P |
S |
| 2.0-3.3 |
14-18 |
≤ 3.0 |
≤ 1.5 |
≤ 2.0 |
≤ 2.5 |
≤ 1.2 |
≤ 0.1 |
≤ 0.06 |
Q235 mild steel backing , chemical composition ( percentage )
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Cu |
| 0.2 |
0.35 |
1.4 |
0.045 |
0.05 |
0.3 |
0.3 |
0.3 |
0.3 |
>Mechanical Property,
-Minimum Hardness, 700 HBN / 63 HRC
-Minimum Tensile Strength, 630Mpa.
-Minimum Shearing Strength, 250Mpa.
Laminated wear blocks---the most common types are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Wafer strips, WS25, WS40, WS50, WS65;
10) Elbow wear blocks
11) Other sizes and shapes
12) Multi-function gradient cutter tooth
13) Rockbox liners
14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Audited Supplier 
){kind=link}
){kind=link}