About Us
Hunan Hyster Material Technology Co., LTD. was founded in 1995 and located in Changsha city, Hunan province, middle of China, covers more than 8000 square meter production site area. We are a professional manufacturer & exporter of composite Bi-metallic wear blocks/wear plates(White Iron brazed with mild steel, hardness 63HRC/725 BHN), high chromium wear castings, Ni-hard wear Liners/Billets, Chromium carbide overlay wear plates, and other metallic wear castings, mainly serve for industries such as Mining, Quarrying, Material conveying systems, Sugar Cane Milling, Iron Mill/Steel Plant, Cement, Sand, Gravel, Dredging, Crushing etc.
Over 95% products have been sold to nearly 300 customers in more than 45 countries and regions such as Australia, Canada, Brazil, America, Chile, Argentina, South Africa, Indonesia, Thailand, Mexico, Russia, Holland, as well as many other countries and areas.
Our annual output of bi-metallic wear blocks/bars/plates is more than 4000tons, capable to produce about 1200 different sizes and shapes; annual output of metal wear-resistant castings is more than 6000 tons.
700BHN White iron wear liners for feeding chute liner protection with excellent impact and abrasion property
Hyster Wear System - BIMETALLIC CAST WHITE IRON WEAR LINERS
HST Bimetallic Wear Plates provides superior resistance to abrasion & impact. Suited for a wide range of Fixed & Mobile applications: Chute's, Hoppers, Apron Feeders, Vibratory Feeders, Transfer points, Ore Passes, Conveyor Skirting, HaulTruck Beds, Target & Deflector plates and Buckets etc.
Typical Advantage/ Properties:
1. Advanced composite technology, good overall performance. It is the third generation since white iron casting and Ni-hard white iron casting. Its hardness could achieve to 63HRC/725BHN, the elements of Cr,Mo,Ni,Cu, etc in the alloy created a better integrated performance(hardness, hardenability, temper resistance). The micro-structure onsists of 85% above Martensite + retained Austenite + Carbide(mainly M7C3 , HV1400-1800).
2. Good corrosion resistance and high temperature resistance(600ºC maximum).
3. Hardness: average 63HRC/700BHN or even a little higher.
4. Well-feasibility: various shapes(including tubular) and dimensions available. Thickness ranges from 12(6/6) to 180mm(150/30). The oversized ones can be spliced.
5. High cost performance: 3 times higher usage life compared with overlay/hardfacing wear plates, at least 10 times longer than A.R type steels 360/400BHN. The thicker ones such as ≥20mm, usage life is much more longer. There is no gradient change on wear resistant performance from plate surface to the brazing joint.
6. Wear plate surface is smooth and flat, media is not easy to stick on. 7. Easy to install and use.
- Welding into place, no pre or post heating required, plug or perimeter weld.
- Arc Studs can easily be attached to the back of the liners to specified requirements.
- Custom counter bore or counter sunk bolt holes can be added.
| TYPICAL APPLICATIONS |
| Wear Pads |
Dump Hoppers |
Lip Protectors |
Concentration Bins |
Hopper Edges |
| Jaw Crushers |
Crusher Hoppers |
Screen Plates |
Buckets |
Shovels |
| Chute Linings |
Vibratory Feeders |
Bucket Liners |
Transition Pieces |
Arm & Hub Liners |
| Ore Chutes |
Rock Box Edges |
Floor Liners |
Coal Transfer Chutes |
Bolt Protectors |
| Crusher Chutes |
Surge Bin Liners |
Loaders |
Apron Feeder Liners |
Truck Bed Liners |
| Tripper Chutes |
Rock Box Liners |
Wear Aprons |
Loading Pocket Liners |
Impact Wall Liners |
| Flop Gate |
Skip Liners |
Knife Inserts |
Hammer Mill Inserts |
Bucket Wheel Protection |
| Bucket Liners |
Draglines |
Crusher Bars |
Rolling Mill Guides |
Conveyor Transfer Points |
Laminated Chrome White Iron Wear Plates Laminated Chrome White Iron Wear Plates are unique wear resistant materials in that they combine very high wear resistant qualities of a white iron(ASTM A532 15/3CrMo, 700BHN-63HRc) with a weldable & high impact toughness mild steel through a metallurgical bond to create a product that is exceptionally resistant to impact and abrasion while retaining.
--Material: ASTM A532 CLASS II TYPE B 15/3CrMo Chrome white iron vacuum brazed onto mild steel base plate.
--Chemical composition of the wear material: C 2.5-3.5; Cr 15-18; Mo 0.5-3.0;
--The minimum thickness available of white iron wear casting is 6mm, the maximum thickness is 160mm.
-- Excellent for Abrasion and Impact Protection
-- Typical application: Chute liner, hopper liners, Crusher liner, Convey and screen liners, all kinds of line protections
Main Features1) Materials: ASTM A532 15/3CrMo White Cast Iron vaccum brazed onto Mild Steel
2) Hardness: average 63HRC/700BHN or even a little higher.
3) Shapes: customized(the hottest one is 300x300mm)
4) Tensile strength: 630Mpa Min.
5) Shearing strength: 250Mpa Min.
6) Advanced composite technology, good overall performance.
7) Good corrosion resistance and high temperature resistance.
8) Wear plate surface is smooth and flat, media is not easy to stick on.
9) Easy to install and use: shapes and sizes can be made on request; Bolts, Nuts, Washers, Holes, Threads are available on request.
10) Well-feasibility and Better cost-efficient.
Hyster Wear System - Ni-hard 4 wear liners, wear billets
Hyster NiHard 4--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Our NiHard products include billets and liner plates that can be made to the customers' specification or supplied from our range of stock sizes. Our NiHard products can be custom designed to meet any situation regardless of any size and shape concerns. We can also supply cut and shaped liners to be strategically placed on fixed plant equipment so that a unique wear package can be created, maximising wear life. This makes NiHard the perfect material for chutes, drop boxes, bin and hopper liners.
We primarily supplies cast billet and liner plates produced to the NiHard 4 specifications.
However, we can produce billets and liner plates from the following alloys on special request:
> NiHard 1 & 2
> 27 Chrome Alloy
> 15/3 White Iron
Hyster Wear System - Overlay Wear Plates
Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
CHEMICAL COMPOSITION C 4.0%~5.5% Cr 21%~27%
BACKING PLATE Standard: SS400 mild steel or equivalent Stainless or others upon request
HARDNESS HV600±; TOLERANCES ± 1mm
HEAT RESISTANCE Maximum: 400 degree
MICROSTRUCTURE Mixture of high volume hexgonal shaped chromium carbide in tough austenitic and martensitic matrix(GRADE 2355)
PENETRATION TO THE BASE METAL 1.5mm
COLD FORMING Minimum Radius: 150mm( for 6+4 ), Suggested: using hydrolic press to bend plate
CUTTING Plasma( from backing plate side ) / Laser Cutting / Water Jet Knife
APPLICATIONS
-Bucket & Lips -Drag liners -Chute & Hopper liners -Cyclones
-Classifier -Ore chutes -Fan blades & Housings -Mine car liners
-Conveyor casings -Steel plant -Green Walt crushers -sinter breaker bar
Hyster offer our clients a wide range of wear products and professional wear solutions. We also welcome custom made one off's and consumables.
Hyster wear system is more than just a product. It is a combination of products, services and metallurgical expertise to provide superior wear protection for mining equipment and other industrial applications. A key part of this package is the Bimetallic Wear Products, a comprehensive offering of buttons, blocks, bars, runners, tiles and overlay plate to match any application.
Hyster White Iron Wear Block(700BHN-63HRC)-- Range of products based on a composite white iron wear surface metallurgically bonded to a weldable mild steel backing plate. Wear block is fixed to the surface of fixed and mobile plant equipment, such as mining buckets and chutes, where protection from severe abrasion is required.
Hyster Overlay Wear Plates--Chromium carbide clad wear plate manufactured in HYSTER and marketed worldwide. Overlay plate is well suited to fixed and mobile plant equipment associated with the construction, mining and resource industries; particularly iron ore, coal, cement and steel applications.
Hyster NiHard--Abrasion and high impact resistant product. It is often cast into billets and liners and used extensively in the mining, construction and mineral processes industries, particularly in bulk handling situations.
Hyster Tungsten Carbide-High standard abrasion resistant product. It is often used where the application has no impact force or very slightly impact.
Following are our laminated wear blocks:
Laminated wear blocks---the most common types are:
1) Chocky bars (CB 25. CB40, CB50, CB65, CB80, CB90, CB100, CB130. CB150)
2) Standard wear bars (DLP201A, DLP 125, DLP184, DLP528, DLP619, DLP451, DLP450, DLP2230, DLP2017, DLP4, DLP919, DLP1191, DLP515, DLP200, DLP271, DLP270, DLP508, DLP115, DLP337, DLP1101, DLP343 )
3) Shaped wear bars
4) Wear buttons& donuts(WB60, WB75, WB90, WB110, WB115, WB150, DLP1920, DLP1921, DLP1994, DLP2196)
5) Shredder/Grinder hammer tips (DLP1654,90X90X50mm; DLP653,90X90X45mm; DLP1927, 90X90X55mm)
6) Bi-metallic wear plates
7) Knife edges(DLP1065-22, 203X22X50MM; DLP1265-22,305X22X50MM; DLP1065A-16, 203x16x50mm, DLP1065A-25, 203x25x62mm; DLP1265A-25, 305x25x56mm)
8) Skid bars, skid blocks(DLP412, 250x150x45mm; DLP413, 200x150x45mm; DLP414, 250x250x45mm)
9) Wafer strips, WS25, WS40, WS50, WS65;
10) Elbow wear blocks
11) Other sizes and shapes
12) Multi-function gradient cutter tooth
13) Rockbox liners
14) Micro-ledges
Overlay wear plates: standard sheet size 1500x3000mm, thickness 4+4(8mm), 6+4(10mm), 6+6(12mm), 8+5(13mm), 8+6(14mm), 10+5(15mm), 10+10(20mm), 12+12(24mm), 12+17(29mm).
Please contact us if you have any interest. thank you!
About Hystertech
Why Our Partner Choose Hyster?
1. We have completly production line. Annual output of bi-metallic wear blocks/bars/plates is more than 3000tons, capable to produce about 1200 different sizes and shapes; annual output of wear-resistant castings is more than 3000 tons, and hardfacing wear plates more than 2000 tons.
2. We have a very skilled team of workers and engineers with more than 15 years of experience.
3. We have independent research and development capabilities.
4. We are fully equipted with all necessary testing devices.
5. Hyster has its own License for Import and Export and also a professional team of sales staff, who are familiar with English, Spanish, Russian and international logistics.
How We Work With Our Partners?
1. We always welcome OEM / Distributor / Agent / Dealer.
2. We supply continuously R&D Support.
3. We guarantee the fastest Service & Delivery.
4. We provide the most competitive Price & Top-grade Quality.
> Confidentiality > Professional > Innovation > Efficient
RFQ
Q: Are you trading company or manufacturer ?
A: We are ISO9001:2015 Certificated factory.
Q: How long is your delivery time?
A: Generally it is 5 days if the goods are in stock. or it is 15 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: 30% in advance.,balance against copy of B/L, payable via T/T.
CONTACT US
Ms. Shing Xiao - President, Sales
Hunan Hyster Material Technology Co., LTD.
E: shing.xiao (at) hystertech (dot) com
Wear Parts & Wear Solutions!
Audited Supplier 
){kind=link}